Results 1 to 10 of 12

Threaded View

  1. #1
    Join Date
    Sep 2015
    Posts
    20

    Default Telescope slew settling time is not working & guiding problems

    I set the telescope slew settling time to 10s but the exposure starts immediately after the slew complete message.

    01:53:41 (wait for slew to complete)
    01:53:45 (slew complete)
    01:53:45 (taking 10 sec. exposure, Luminance filter, binning = 4)
    01:53:45 (using Raw readout mode)
    01:53:46 (starting exposure)
    01:53:57 (exposure complete)
    01:54:01 (exposure complete and image downloaded)
    01:54:02 Image finished
    01:54:02 Plate-solve pointing image.

    I have the settling time set in the 'Preferences->Telescope->Slew Settle Time = 10 sec. Any ideas?

    Jerry Gunn
    Last edited by Bob Denny; Sep 24, 2015 at 16:43. Reason: Changed title - adding guiding problem under discussion here as well

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Telescope Settle time (after move)
    By Adam Block in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 12
    Last Post: Aug 3, 2016, 01:15
  2. mount does not connect #telescope set slew settle time error
    By TRAPPIST in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 3
    Last Post: May 27, 2015, 00:07
  3. slew failed & run-time error in ACP4.1
    By Dieter Husar in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 2
    Last Post: Jun 1, 2009, 17:31
  4. ACP with EQMOD slew problems (definately user caused!)
    By Neil Chase in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 2
    Last Post: Mar 6, 2009, 06:38

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •