Your log shows that guiding is disabled.
...
04:49:40 Initializing AcquireSupport V7.0.4
04:49:40 Telescope is ACP->Meade 16" f/7.5, driver V2
04:49:40 MaxIm DL/CCD is version 5.24
04:49:40 Imager is SBIG Universal
04:49:40 Autoguiding is disabled
04:49:40 Calculated unbinned plate scales (arcsec/pix): H = 0.61 V = 0.61
04:49:40 Calculated field of view (arcmin): H = 22.2 V = 14.9
...
That setting is in ACP Preferences, Guiding tab. Also make sure you have the Adaptive Optics checked.
ACP will not find the guide star for you, you need to use a field of view indicator or some way to know how far yu have to "fudge" the pointing of your target so you get a guide star. It's probably going to be tough if you don't have a rotator unless you have a wide field of view.