Hi,

Just a trivial question:

When using Aquirestar you have to specify what protocol to use to control the telescope in the Telescope Tab under setup.
I have always used "The Sky Controlled Telescope", since using ACP, should I be using the "ACP Hub Telescope" control mechanism instead.

Lately I have been getting a VBscript error when ACP tries to invoke FocusMax during an imaging run. ACP shuts down the script and all is left is the Telescope tab from Focusmax with no values in the boxes. I have to shut down FocusMax using Task Manager before being able to restart FocusMax.

So I am wondering if this may be the cause.
I have never had this problem before but I am wondering if anyone else has experienced this problem.

Below is the log extract from ACP:

15:23:35 Do periodic auto-focus...
15:23:35 [flip check: Tn=660s HAc=15024s GW=T HAz=15680s DWz=T WF=no]
15:23:36 (stopping the autoguider)
15:23:36 **Script Error (Tracking has been stopped)**
15:23:37 Source: Microsoft VBScript runtime error
15:23:37 Message: ActiveX component can't create object: 'FocusMax.FocusControl' at line 1434 column 33.
ACP console log closed 25-Apr-2012 15:23:38 UTC

Cheers
Mark