I've gone through the forums+documentation and have set up the simulator at home so that I could start to graduate to my full setup at New Mexico Skies.
At home. I'm unable to get to the final step of doing a v curve with Focusmax
(ver 3.6.0.71). When I start to run the first light wizard I keep getting the following error log :
==
22:29:42 ** Beginning Auto VCurve run **
22:29:44 * Start Find Star *
22:29:44 Min/Max flux setting = 100/500K
22:29:44 Exposure = 0.11 sec
22:29:44 Find star binning = 2x2
22:29:47 Target star found at X = 2086 , Y = 2159 Flux = 37453
22:29:47 Binning = 1x1
22:29:49 Star is too close to frame edge or is too weak
22:29:49 Increasing Subframe Width, attempt 1
22:29:50 Star is too close to frame edge or is too weak
22:29:50 Increasing Subframe Width, attempt 2
22:29:51 Increasing exposure Time
22:29:51 Total Flux = 20782, next exposure = 1.59 sec
22:29:54 Targeting low flux setting
22:29:54 Total Flux = 20824, next exposure = 7.67 sec
22:29:54 Exposure > max exposure setting 5
22:29:54 Stopping process
22:29:54 ** Star is too dim **
22:29:54 Total flux < min flux setting
22:29:54 Can not find target star
22:29:54 Stopping
22:29:54 Stopping Auto VCurve
===
Please HELP!!!!!!
- aLV