Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Join Date
    Nov 2005
    Location
    Scottsville, Virginia
    Posts
    1,227

    Default Planner Doesn't Appear in Starry Night Pro +

    Most likely I installed ACP Planner 4.2 before Starry Night Pro+ 6.4.3 so it doesn't seem that Planner is aware of SNP. I did a repair thinking that maybe it would register the needed files for SNP but nothing seems to have changed. I did download and copy over the plug-in and that shows up fine now. Right clicking on a target in SNP doesn't offer any option to save to plan even though I have the time set ahead. Any ideas would be great. I know it's something on my part and I've read through a couple of what seem to be related threads but I didn't see the answer I need. Guess I'm a special needs guy today!

    Thanks,
    Steve
    http://www.astral-imaging.com

    Scottsville, Virginia
    ACP Expert
    AP1200GTO
    Tak EM200
    AP 92mm Stowaway
    OGS 12.5" RC
    TAK FSQ-106ED
    STL-11000M/CF8
    ST10XME/CFW8
    Pyxis 3" Rotator
    Starlight Xpress UltraStar Guider
    MMOGA
    12' Astro Haven Dome

  2. #2
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    31,335

    Default

    I'll have to get onto your system as I can't imagine what the problem is. My guess is that they changed the folder hierarchy and names again (!!) so the installer doesn't know where to look. I'm glad you found the plugin.

    If you'll call Wednesday I'll try to figure it out. Tomorrow is already hosed :-)
    -- Bob

  3. #3
    Join Date
    Nov 2005
    Location
    Scottsville, Virginia
    Posts
    1,227

    Default

    Wednesday will work. Tomorrow's busy with a class I have to take for my total knee replacement that's being done in two weeks and then a rescue squad training session later in the afternoon and evening. Thanks for the great support as usual!
    Steve
    http://www.astral-imaging.com

    Scottsville, Virginia
    ACP Expert
    AP1200GTO
    Tak EM200
    AP 92mm Stowaway
    OGS 12.5" RC
    TAK FSQ-106ED
    STL-11000M/CF8
    ST10XME/CFW8
    Pyxis 3" Rotator
    Starlight Xpress UltraStar Guider
    MMOGA
    12' Astro Haven Dome

  4. #4
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    31,335

    Default

    What? You're having your knee replaced during the day then going to rescue squad training that night? Now that's amazing.

    Call Wednesday and we'll look at this issue.
    -- Bob

  5. #5
    Join Date
    Nov 2005
    Location
    Scottsville, Virginia
    Posts
    1,227

    Default

    No, I wish! Required to take a 3 hour informative class about what will happen, before, during, and after the procedure. There's a 2-3 night stay afterward and then the real work happens getting flexibility and muscle back in shape.
    Steve
    http://www.astral-imaging.com

    Scottsville, Virginia
    ACP Expert
    AP1200GTO
    Tak EM200
    AP 92mm Stowaway
    OGS 12.5" RC
    TAK FSQ-106ED
    STL-11000M/CF8
    ST10XME/CFW8
    Pyxis 3" Rotator
    Starlight Xpress UltraStar Guider
    MMOGA
    12' Astro Haven Dome

  6. #6
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    31,335

    Default

    Ah, OK. The good news is that I know a few people who have gotten knee replacements and they are working great. One of those folks is back on the County Sheriff's SWAT team.
    -- Bob

  7. #7
    Join Date
    Nov 2005
    Location
    Scottsville, Virginia
    Posts
    1,227

    Default

    When do you want a look see? Anytime on is fine as I'm here the rest of the day.

    Steve
    Steve
    http://www.astral-imaging.com

    Scottsville, Virginia
    ACP Expert
    AP1200GTO
    Tak EM200
    AP 92mm Stowaway
    OGS 12.5" RC
    TAK FSQ-106ED
    STL-11000M/CF8
    ST10XME/CFW8
    Pyxis 3" Rotator
    Starlight Xpress UltraStar Guider
    MMOGA
    12' Astro Haven Dome

  8. #8
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    31,335

    Default

    Oh, sorry. I went to a benefit BBQ for the family of the deputy sheriff who was killed in action here a few days ago. I just found out about it last night. I will be gone Friday as the funeral is then. I'll call tomorrow.

    http://bit.ly/xTeV8L
    -- Bob

  9. #9
    Join Date
    Nov 2005
    Location
    Scottsville, Virginia
    Posts
    1,227

    Default

    Issue seems to be resolved. Instead of doing another "repair" of Planner I un-installed and re-installed again. Whatever was the issue is now resolved and SN shows option to add object to plan.
    Steve
    http://www.astral-imaging.com

    Scottsville, Virginia
    ACP Expert
    AP1200GTO
    Tak EM200
    AP 92mm Stowaway
    OGS 12.5" RC
    TAK FSQ-106ED
    STL-11000M/CF8
    ST10XME/CFW8
    Pyxis 3" Rotator
    Starlight Xpress UltraStar Guider
    MMOGA
    12' Astro Haven Dome

  10. #10
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    31,335

    Default

    Oh good! Thanks for letting me know. I normally recommend against uninstall/reinstall but in this case you did it and it worked!
    -- Bob

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Starry Night and Planner
    By Larry Simpson in forum ACP Planner
    Replies: 14
    Last Post: Mar 9, 2015, 15:13
  2. ACP Planner and Starry Night not talking
    By Daniel Johnson in forum ACP Planner
    Replies: 7
    Last Post: Mar 28, 2011, 20:21
  3. Starry Night Pro v6
    By Dick Berg in forum General Astronomy-Related
    Replies: 3
    Last Post: May 13, 2010, 00:24
  4. Problem with Planner 2.0 and Starry Night 5
    By astrogolfer in forum ACP Planner
    Replies: 7
    Last Post: May 1, 2010, 21:46
  5. Starry Night and Planner not working
    By Mark Kuehner in forum ACP Planner
    Replies: 1
    Last Post: Mar 11, 2010, 15:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •