Hi Todd

I'm working on implementing the guiding failure report. I've been looking through my logs for examples and I've found this:

21:57:50 (guider error n/a or too high, try #19)
21:57:51 (ex=1.38 ey=2.60)
21:57:51 (guider error n/a or too high, try #20)
21:57:52 (stopping the autoguider)
21:57:52 **Imaging error: **Excessive guiding errors just before image acquisition
21:57:52 Will try image again, this time unguided.
21:57:52 (taking 300 sec. exposure, Blue filter, binning = 2)

Do you have any examples which fail differently from the above (e.g. that fail in the middle of imaging, or some other failure)? I just want to be sure I cover all the possible failure scenarios.

Thanks

Russ