Results 1 to 1 of 1

Threaded View

  1. #1
    Join Date
    Oct 2005
    Location
    Mesa, AZ
    Posts
    28,658

    Default Downloading and Using PinPoint Reference Catalogs (Updated June 2020)

    Which reference catalog should I use?

    We recommend against USNO UCAC4 for plate solving for telescope pointing because it lacks stars fainter than mag-16, for only about one hundred million stars, where the smaller USNO A2.0 has five times as many stars and includes many more faint (down to mag-18) stars. This can make plate solving with A2.0 more reliable. The small errors in a few individual stars (proper motions) in A2.0 are irrelevant for telescope pointing.

    The short story: For plate solving in ACP, MaxIm, FocusMax, etc. which use PinPoint to get hyper-accurate image center point coordinates, use either the GSC or the USNO-A2.0. The choice depends on your field of view. If it's more than 20 arc minutes, you can use the GSC. If less, you should consider the A2.0. The disadvantage of the A2.0 is that you have to download and store 6 gigabytes. The disk space costs essentially nothing. You only have to download it once, but it'll take hours at a minimum. Bottom line: use A2.0 if you can.

    For precision astrometry of individual objects in an image, the choice of catalog is more dependent on what you're doing, but in general the USNO UCAC4 catalog is a great choice. It is the one that is recommended by the IAU Minor Planet Center and others for precision astrometry.

    How do I get the Catalogs?

    Note: Do not attempt to use Internet Explorer for FTP access. It is just too lame. Create a "network place" for the FTP location and use that. Look in the Windows Help and Support Center file for "network places" for details. Or use an FTP application like the free FileZilla FTP Client. If you do use an FTP program like Filezilla, be sure to set your FTP program to "binary" transfer mode. Auto can result in corrupt catalog files form some of the catalogs. Binary always works.

    Guide Star Catalog:

    As of October 2003, the STScI GSC in its original format (FITS tables) is no longer available from NASA ADC. In order to support our customers, we have placed this catalog online at http://gsc.dc3.com/. Detailed instructions are in the readme.txt file at the above address. If you have a reliable net connection, download the self-contained installer (300+ MB) then run it. You can trash the installer after that.

    The most common problem with the GSC is having the wrong directory layout. The 2-CD set from ASP, as well as the online distribution at http://GSC.DC3.com/ has the catalog files in a subdirectory called GSC and the table files in a subdirectory called TABLES. PinPoint is designed to work with the CD-ROM root/drive as the path for all of its catalogs, and GSC is no exception. Set PinPoint's path to the parent directory of the GSC and TABLES directories, wherever it is.

    If you are using the 2-CD (uncompressed) version of the GSC/1.1 as obtained from (e.g.) the Astronomical Society of the Pacific, you must have two CD-ROM drives (or copy the contents of both CD-ROM into a common directory on hard disk). When using 2 CD-ROM drives, enter the drive letters for the north disk and south disk separated by a semicolon (e.g., "N:;S:") This will also work if you choose to copy the North and South CDs into separate directories on (possibly 2 different) hard disk(s); separate the north and south directory paths with a semicolon.

    USNO A2.0

    This is a large catalog (6Gb), and while old, this is still the "one to use" for common plate-solved telescope pointing applications because it goes deeper than the others, and includes bright stars. The fact that some nearby stars' proper motions are out of date has an insignificant effect on the centering accuracy of the solution. If you have a solid internet connection, you can get it as this single 4 Gb zip file hosted on DropBox. You can also download it in bits and pieces at night if needed. Get it via http://usnoa2.dc3.com/. Read the A-HOW-TO-DOWNLOAD.txt document at the top by clicking on it with your browser. Now back up and using those directions, copy the zonexxxx.acc and zonexxxx.cat.zip files to a directory on your system. Unzip the cat files and throw away the .cat.zip files. Set your catalog type to USNO A2.0. Set your catalog path to the directory into which you copied the files from USNO. Sorry but the USNO service has been closed.

    USNO UCAC4 (PinPoint 6 or later only)

    The UCAC4 is a large catalog (over 8Gb), but it is "the one to use" if you are doing precision astrometry with PinPoint 6 or later. Get the catalog from CDS at ftp://cdsarc.u-strasbg.fr/pub/cats/I/322A/UCAC4. [CDS stands for Centre de Données astronomiques de Strasbourg.]

    There are 908 files to be downloaded. Using FTP through a web browser will be tedious and prone to error. An easier, faster, automated, and more reliable approach is to use an FTP client to transfer the entire UCAC4 folder to your desktop computer in one step. We recommend using the free Filezilla Client software. If you don't have it, download it from https://filezilla-project.org/. The following recipe will apply specifically to Filezilla but probably applies similarly for other ftp clients.

    Start Filezilla. First, connect to the cdsarc server. That means going into File > Site Manager, selecting New Site, and putting "cdsarc.u-strasbg.fr" in the Host field. Probably all the other settings can be defaults, certainly Logon Type is Anonymous. Dismiss any warning popup about password and files going over internet in plain text. CDS in Anonymous doesn't have a meaningful password, and these files aren't private. Click Connect, then OK, and the Remote Site (right side panel of Filezilla) should populate within a few seconds. In the menu bar at the top of Filezilla, select "Transfer > Transfer type" and make sure it is set to "Binary." This is crucial.

    On Filezilla's left side panel find and navigate to your "User/Desktop" folder where the UCAC4 folder and all it's contents can be temporarily saved. With a few clicks through the folders, the navigation is not tricky.

    Now on Filezilla's right side panel navigate to the FTP site at cdsarc.u-strasbg.fr > pub/cats/I/322A/UCAC4/.

    Here's what part of the right side looks like when you first connect:

    Name:  one.jpg
Views: 414
Size:  9.8 KB

    Scroll down to the "I" and double click it. (That's the "I" in the site address above.) You see this next:

    Name:  two.jpg
Views: 415
Size:  5.8 KB

    Then scroll down to find "322A" and double-click on it. That brings you to this place:

    Name:  three.jpg
Views: 406
Size:  12.1 KB

    Stop here.

    To start the transfer drag the UCAC4 folder on the right side (source) to the left desktop folder (destination) and wait. It just works--it makes all the new directories, keeps track of which files downloaded correctly and retries if necessary, reconnects if connection lost, etc. Downloading a new copy of UCAC4 can be done in background.

    Finally, run the Catalog Checker, which is accessible from the Windows Start menu > PinPoint > Catalog Checker (or C:\Program Files (x86)\ACP Obs Control\Catalog Tools\CatalogChecker.exe) to validate the installation, and move the UCAC4 folder to your permanent location.

    [This is a compilation of Comm Center notes from Bob Denny, Eric Dose and Dick Berg.]

    USNO UCAC2 and UCAC3 are superseded by UCAC4.

    Tycho-2 (Special applications only!)

    As of April 2011, the Tycho 2 catalog is no longer available in its original format. In order to support our customers, we have placed this catalog online at http://tycho2.dc3.com/ Copy all of the files in this directory as well as all subdirectories, preserving the subdirectory structure exactly, to a directory on your system or to a CD-ROM at the root. Set your catalog type to Tycho-2. Set your catalog path to the directory into which you copied the tree. See the README.txt file at the root of the catalog data.
    Last edited by Bob Denny; Jun 2, 2020 at 18:39. Reason: UCAC4 Revisions by Dick Berg
    -- Bob

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Downtime June 7
    By Bob Denny in forum Help Using the Comunication Center
    Replies: 0
    Last Post: Jun 8, 2012, 08:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •