Results 1 to 4 of 4

Threaded View

  1. #4
    Join Date
    Nov 2015
    Location
    Christchurch, Dorset, United Kingdom
    Posts
    413

    Default

    I don’t know the model of the camera you are using but vaguely similar images can be created on shutterless cameras when Auto-dark subtraction is accidentally left enabled in MaxIm (see options menu on the Expose tab of MaxIm’s Camera Control window) and an auto-dark is taken with the telescope uncovered but pointing at a target and then a normal image is taken of the target a little later with a small drift in mount pointing, after automatic subtraction of the auto-dark you are left with black shadows around the side of the star(s) corresponding to the opposite direction of drift, and a zero or negative ADU background pedestal.

    If your camera has a shutter and you do use auto-dark subtraction then check that the shutter has not failed in the open position and if the camera doesn’t have a shutter check that auto-dark is not enabled in MaxIm.

    Besides the above, any problem with the camera sensor bias voltages or clock timing for the sensor readout due to a camera electronics fault could produce a similar looking image.

    William.
    Last edited by William Bristow; Nov 20, 2023 at 18:08. Reason: Spelling

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. You have no idea....
    By Bob Denny in forum Help Using the Comunication Center
    Replies: 0
    Last Post: Jan 19, 2019, 01:18

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •