After the Win11 update "2023-10 Update for Windows 11 Version 22H2", I ran into the USB "sleep" issue disconnecting the system. Once that was corrected, a new problem emerged trying to run AutoFlat.vbs for dawn flats (log below). This is the same flat plan that I have used for dawn flats for months.
The problem is only with dawn flats. The same flat plan works if run at dusk.
ACP console log opened 03-Nov-2023 11:57:00 UTC
This is ACP version 7.0 (build 3, Production Release V7)
Licensed to David Jarkins
11:57:00 This is AutoFlat version 7.1.2
11:57:00 Using flat plan defaultflat.txt
11:57:00 Starting dawn flats. High Sun at 07:52:30
11:57:00 Starting flat field acquisition.
11:57:00 Doing 10 flats in I at binning 1
11:57:00 Start slew to flat area...
11:57:01 Switching from V to I filter for imaging
11:57:01 Focus change of 600 steps required
11:57:15 (wait for slew to complete)
11:57:17 (slew complete)
11:57:17 (tracking off...)
11:57:17 Property write Tracking is not implemented in this driver.
11:57:17 **Script Error**
11:57:18 Source: ASCOM.SoftwareBisque.Telescope
11:57:18 Message: Property write Tracking is not implemented in this driver.
Probably an error in the flat plan at line 842 column 17.
ACP console log closed 03-Nov-2023 11:57:19 UTC