Results 1 to 7 of 7

Threaded View

  1. #1
    Join Date
    Apr 2006
    Location
    Celina, TX
    Posts
    187

    Default Failure to Slew to Target

    Hi Bob,
    Last night at 7:11 UTC (2:11 local) an image completed successfully and Scheduler started another. The image which completed was NGC7280 which had transited at 11:03 local so was well to the West when completed.
    The image which was called by Scheduler was NGC598 (m33) which crossed meridian at 2:14 local. Bad luck with timing?? As i mentioned in my last post my flip preferences are set for this telescope:

    When slewing East to West... and also When slewing West to East...
    Mount Flip 0.0 minutes both before and after meridian.

    When tracking... (only to protect filter wheel on rotator from pier in the 40 to 50 DEC range with this OTA)
    Mount can track -7 minutes past flip point
    Mount needs 4 minutes to assure flip

    I awoke this morning to see the ACP slewing light had been flashing since 2:11 am though I'm pretty sure the mount was just sitting idle pointing straight up. The only way out was to connect SkyX to mount and ask to point at something a bit East. After that I could run shutdown to park dome and scope and close up. In the ACP logs you will see for m33 that at 7:11:46 UTC slew to m33 started and ACP sat patiently until I aborted at 13:05:17 UTC.

    I have never seen this particular behavior in years of use before and the only thing different is my changing the mount can track past to a negative number. Setting up APCC is a bit witchy to me I admit. The AP and APCC logs are huge (~93mb) but 31 compressed.. This is the 2nd time in a week the exact same thing has happened though last time it was at a pier flip for NGC7280 as the mount was stuck at dec +58.

    My suspicion is this problem lies on the APCC side because that is what has stopped the mount. The AP/APCC logs are too much for me as I do not know what to look for and there are entries every ms. Is there a path to sort this out? Maybe Ray has sage advice. Funny because last 4 nights were perfect all night with multiple flips etc.

    Best,

    Ron
    Attached Files Attached Files

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Repeated slew after message slew complete appears - although scope reached position
    By Peter Jankowski in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 16
    Last Post: Mar 13, 2014, 21:41
  2. Slew failure on Temma - Help Requested
    By Yung Jung Chang in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 0
    Last Post: Dec 24, 2012, 18:42
  3. Temma slew failure (was Failed Sky-Flats)
    By mandell in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 2
    Last Post: Oct 15, 2010, 04:37

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •