Capture from FOV indicator in TheSkyX

[Francois Regembal]

Hi all,

I'd like to import the coordinates of the center of a field of view indicator from The Sky X directly into an ACP Plan.
The help menu states: "In the ACP Plan Capture applet, click Current FOV or Center of TheSky."
However, I cannot find these commands to click.

Could someone direct me to find them?

Thanks

François

[Bob Denny]

I'm sorry it is "Add target from FOVI" (there is text after both images below, scroll all the way)

Snap2.jpg

The other button Quick FOVI shows the center coordinates (which you can also set to continuously display in the TheSky Status Bar as described in this video):

Snap4.jpg

Also did you see my suggestion on the camera freezing?

[Francois Regembal]

Thanks Bob!
I'll try that at the earliest opportunity and report back.

François

[Bob Denny]

Did you see my suggestion on the camera freezing?

[Francois Regembal]

Yes Bob. I did reply on that thread.
Thanks

[Francois Regembal]

Hi Bob,
How do you get to the "TheSky Plan Capture" window? I cannot find it...
François

[Bob Denny]

Do you have TheSkyX installed on your system? Is it possible you installed it after Planner? If you do have TheSky X:

1. Find TheSky.exe, right-click, select Run as Administrator. Allow it to completely start up.
2. Exit from TheSky and never run again as Administrator
3. Re-run the ACP Planner installer. <-- direct link to installer

Now Planner should show desktop icons for the Capture apps, starting Plan or Quick capture should automatically start TheSky, and all of this should be inder ACP Planner in your Windows Start menu.

[Francois Regembal]

Hi Bob,

I have followed the steps you prescribed and all is now working just as it should! Amazing functions!
Thanks

Francois

[Bob Denny]

Thank you for letting us know!!! Best wishes.