Results 1 to 7 of 7

Threaded View

  1. #1
    Join Date
    Jun 2013
    Location
    Pasadena, CA
    Posts
    218

    Default No Scheduler activity - PWI Rotator Locked up

    Bob,

    This may or may not be related to the aquiresupport script stuff we talked about today but it started when I opened and changed the PWI callout, but I put it back to the original code.

    On Don's setup, currently, it starts up, goes to a target and just sits there waiting and never actually starts taking the image of the target it selected. I am going through the logs and see all kinds of errors I have never seen before. Here are a few snippets (I will attach the full logs).

    Attach ACP sequencer
    2019-07-14 06:44:02.5: There is no controllable dome or roof.
    2019-07-14 06:44:02.6: Weather successfully connected. Wait for valid data...
    2019-07-14 06:44:03.5: Sequencer does screen/panel flats
    2019-07-14 06:44:07.6: HTTP command listener failed to start: Access is denied
    2019-07-14 06:44:07.6: If this is Windows 8-10, you will need to add permission (ACL) to listen on port 9123.
    2019-07-14 06:44:07.6: See Scheduler Help > Configuring the Program > Noteworthy Configuration Options, at the bottom.
    2019-07-14 06:44:07.6: ++ Weather Safe ++


    Sequencer is now active
    2019-07-14 11:51:55.0: ** Script interrupted by weather safety event.
    2019-07-14 11:52:34.2: Sequencer is no longer active
    2019-07-14 11:53:04.3: Post-job status check done (stat=Running)
    2019-07-14 11:53:04.3: ACP ABORT: Acquisition process was interrupted by weather unsafe.
    2019-07-14 11:53:04.3: ACP data acquisition failed for Observation M 27.
    2019-07-14 11:53:04.3: (Plan M 27-SII 300s (13-24) will be resubmitted in its entirety.
    2019-07-14 11:53:04.3: (Observation M 27 interrupted by weather unsafe event.)
    2019-07-14 11:53:04.5: -- Weather Unsafe --
    2019-07-14 11:53:05.5: ++ Morning Screen Flats ++
    2019-07-14 11:53:05.5: Start ACP AutoFlat script for panel/screen flats
    2019-07-14 11:53:05.5: ACP.RunScript(AutoFlat, C:\Users\Telescope Control\Documents\ACP Astronomy\Plans\SchedulerDawnFlats.txt):
    2019-07-14 11:53:05.5: Script ACP-Weather is loaded, and
    2019-07-14 11:53:05.5: the console is idle.
    2019-07-14 11:53:05.5: In start loop, i = 0
    2019-07-14 11:53:05.5: Console is now idle
    2019-07-14 11:53:05.6: Loaded C:\PROGRA~2\ACPOBS~1\Scripts\AutoFlat.vbs successfully
    2019-07-14 11:53:05.6: Set parameter "C:\Users\Telescope Control\Documents\ACP Astronomy\Plans\SchedulerDawnFlats.txt" successfully
    2019-07-14 11:53:05.6: Script started successfully
    2019-07-14 11:53:15.6: Sequencer is now active
    2019-07-14 12:27:42.1: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED**
    2019-07-14 12:27:56.7: Sequencer is no longer active
    2019-07-14 12:27:56.7: ** ACP script "AutoFlat" failed:
    2019-07-14 12:27:56.7: **Script Error**
    Source: ACP
    Message: The script was aborted.
    Location: line 804 column 13.




    2019-07-15 15:14:38.7: -- Observatory Shutdown --
    2019-07-15 15:14:38.7: Start ACP Sequencer's ShutdownObs script
    2019-07-15 15:14:38.7: ACP.RunScript(ShutdownObs, ):
    2019-07-15 15:14:38.7: Script ShutdownObs is loaded, and
    2019-07-15 15:14:38.7: the console is idle.
    2019-07-15 15:14:38.7: In start loop, i = 0
    2019-07-15 15:14:38.7: Console is now idle
    2019-07-15 15:14:38.7: Loaded C:\Users\Public\Documents\ACP Config\Scheduler\ShutdownObs.js successfully
    2019-07-15 15:14:38.7: Script started successfully
    2019-07-15 15:14:48.7: Sequencer is now active
    2019-07-15 15:14:53.7: Sequencer is no longer active
    2019-07-15 15:15:36.8: ACPSequencer: transient error getting DispatcherEnabled.
    2019-07-15 15:15:36.8: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:36.8: ACPSequencer: transient error getting DispatcherEnabled.
    2019-07-15 15:15:36.8: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
    2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.3: **EXCEPTION IN SCHEDULER:
    2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.3: Traceback:
    at ACP.UtilClass.get_Scheduler()
    at DC3.Scheduler.ACPSequencer.set_DispatcherStatus(St atusValue value)
    at DC3.Scheduler.Engine.set_Status(StatusValue value)
    at DC3.Scheduler.Engine.Run()
    2019-07-15 15:15:37.3: DOME/ROOF FAILURE: In addition, attempting to close your dome/roof this error occurred:
    2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
    2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
    2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
    2019-07-15 15:15:37.4: No operator intervention command tool specified





    Are any of these errors related to the weather fix?

    Paul
    Attached Files Attached Files

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. PWI Focuser Error causes ACP to freeze and Scheduler to fail with a Windows error box
    By Russell Carroll in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 6
    Last Post: Apr 22, 2017, 22:25
  2. PWI Software Too Old (was: ACP 7.2 and PWI 3.2.4)
    By Colin Eldridge in forum Hardware/Software/Driver Topics Not Directly Related to Our Software
    Replies: 4
    Last Post: Sep 23, 2014, 14:39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •