No Scheduler activity - PWI Rotator Locked up

[Paul Gardner]

Bob,

This may or may not be related to the aquiresupport script stuff we talked about today but it started when I opened and changed the PWI callout, but I put it back to the original code.

On Don's setup, currently, it starts up, goes to a target and just sits there waiting and never actually starts taking the image of the target it selected. I am going through the logs and see all kinds of errors I have never seen before. Here are a few snippets (I will attach the full logs).

Attach ACP sequencer
2019-07-14 06:44:02.5: There is no controllable dome or roof.
2019-07-14 06:44:02.6: Weather successfully connected. Wait for valid data...
2019-07-14 06:44:03.5: Sequencer does screen/panel flats
2019-07-14 06:44:07.6: HTTP command listener failed to start: Access is denied
2019-07-14 06:44:07.6: If this is Windows 8-10, you will need to add permission (ACL) to listen on port 9123.
2019-07-14 06:44:07.6: See Scheduler Help > Configuring the Program > Noteworthy Configuration Options, at the bottom.
2019-07-14 06:44:07.6: ++ Weather Safe ++


Sequencer is now active
2019-07-14 11:51:55.0: ** Script interrupted by weather safety event.
2019-07-14 11:52:34.2: Sequencer is no longer active
2019-07-14 11:53:04.3: Post-job status check done (stat=Running)
2019-07-14 11:53:04.3: ACP ABORT: Acquisition process was interrupted by weather unsafe.
2019-07-14 11:53:04.3: ACP data acquisition failed for Observation M 27.
2019-07-14 11:53:04.3: (Plan M 27-SII 300s (13-24) will be resubmitted in its entirety.
2019-07-14 11:53:04.3: (Observation M 27 interrupted by weather unsafe event.)
2019-07-14 11:53:04.5: -- Weather Unsafe --
2019-07-14 11:53:05.5: ++ Morning Screen Flats ++
2019-07-14 11:53:05.5: Start ACP AutoFlat script for panel/screen flats
2019-07-14 11:53:05.5: ACP.RunScript(AutoFlat, C:\Users\Telescope Control\Documents\ACP Astronomy\Plans\SchedulerDawnFlats.txt):
2019-07-14 11:53:05.5: Script ACP-Weather is loaded, and
2019-07-14 11:53:05.5: the console is idle.
2019-07-14 11:53:05.5: In start loop, i = 0
2019-07-14 11:53:05.5: Console is now idle
2019-07-14 11:53:05.6: Loaded C:\PROGRA~2\ACPOBS~1\Scripts\AutoFlat.vbs successfully
2019-07-14 11:53:05.6: Set parameter "C:\Users\Telescope Control\Documents\ACP Astronomy\Plans\SchedulerDawnFlats.txt" successfully
2019-07-14 11:53:05.6: Script started successfully
2019-07-14 11:53:15.6: Sequencer is now active
2019-07-14 12:27:42.1: **DISPATCHER INTERRUPT LEVEL 1 RECEIVED**
2019-07-14 12:27:56.7: Sequencer is no longer active
2019-07-14 12:27:56.7: ** ACP script "AutoFlat" failed:
2019-07-14 12:27:56.7: **Script Error**
Source: ACP
Message: The script was aborted.
Location: line 804 column 13.




2019-07-15 15:14:38.7: -- Observatory Shutdown --
2019-07-15 15:14:38.7: Start ACP Sequencer's ShutdownObs script
2019-07-15 15:14:38.7: ACP.RunScript(ShutdownObs, ):
2019-07-15 15:14:38.7: Script ShutdownObs is loaded, and
2019-07-15 15:14:38.7: the console is idle.
2019-07-15 15:14:38.7: In start loop, i = 0
2019-07-15 15:14:38.7: Console is now idle
2019-07-15 15:14:38.7: Loaded C:\Users\Public\Documents\ACP Config\Scheduler\ShutdownObs.js successfully
2019-07-15 15:14:38.7: Script started successfully
2019-07-15 15:14:48.7: Sequencer is now active
2019-07-15 15:14:53.7: Sequencer is no longer active
2019-07-15 15:15:36.8: ACPSequencer: transient error getting DispatcherEnabled.
2019-07-15 15:15:36.8: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:36.8: ACPSequencer: transient error getting DispatcherEnabled.
2019-07-15 15:15:36.8: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.3: **EXCEPTION IN SCHEDULER:
2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.3: Traceback:
at ACP.UtilClass.get_Scheduler()
at DC3.Scheduler.ACPSequencer.set_DispatcherStatus(St atusValue value)
at DC3.Scheduler.Engine.set_Status(StatusValue value)
at DC3.Scheduler.Engine.Run()
2019-07-15 15:15:37.3: DOME/ROOF FAILURE: In addition, attempting to close your dome/roof this error occurred:
2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.3: ACPSequencer: transient error getting DispatcherEnabled.
2019-07-15 15:15:37.3: The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. (Exception from HRESULT: 0x80010007 (RPC_E_SERVER_DIED))
2019-07-15 15:15:37.4: No operator intervention command tool specified





Are any of these errors related to the weather fix?

Paul