Hello Everyone,

I am trying to run the script FocusOffsets.VBS but get the following errors

Initializing AcquireSupport V8.2.3
Telescope is ACP->CDK700, driver V3
Dome is ACE SmartDome controller
MaxIm DL is version 6.18
Imager is SBIG w/ AO
Selecting filter Luminance from previous ACP run at 20181120@093440 UTC
Imager readout modes:
0 is Normal
1 is Fast
2 is Normal w/RBI pre-flash
3 is Fast w/RBI pre-flash
Using Normal and Fast readout modes from RoModeInfo.txt
Normal mode is Normal
Fast mode is Fast
Autoflat mode is Normal
Autoguiding is disabled
Calculated unbinned plate scales (arcsec/pix): H = 0.41 V = 0.41
Calculated field of view (arcmin): H = 27.9 V = 27.9
Plate solving With A2.0 (best for pointing)
Mount supports tracking rate offsets
Imager rotator support enabled
FYI, clear filter is #3
Starting FocusOffset run...
Selected Luminance as reference
Start slew to FocusArea...
(wait for slew to complete)
(slew complete)
**Script Error (Tracking has been stopped)**
Source: Microsoft VBScript runtime error
Message: ActiveX component can't create object: 'ASCOM.PWI3.Focuser'
Location: line 177 column 9.

I think this has to do with my particular install but hoping someone can help me with this.

Don