So, I am setting up a new system. First time use of the Test Dawn Flats and I get the error noted below. I have the autoflat.cfg and filterinfo.txt files all set up. I wonder if this is some type of Win 10 issue?
I saw this type of error in the past doing other things and reset the computer to resolve it. In this case I did reset the computer and the problem did not go away.
Suggestions???
Peter



== OBSOLETE COMPRESSFLATS IN AUTOFLATCONFIG ==
== Compression now uses web account setting ==
Initializing AcquireSupport V8.1.1
Telescope is ACP->A200 Default, driver V2
Dome is MaestroDome
MaxIm DL is version 6.08
Imager is Apogee USB/Net
Using focus offsets and star mags from FilterInfo.txt
Selecting filter Luminance from previous ACP run at 20170811@135225 UTC
Imager readout modes:
0 is Monochrome
1 is Monochrome (Preflash)
Guider is SX Universal (rotated off-axis)
Guider plate scale is 0.8 arcsec/pix. Guided dither with main imager pixels
Max unguided exposure 300 sec.
Calculated unbinned plate scales (arcsec/pix): H = 0.47 V = 0.47
Calculated field of view (arcmin): H = 31.9 V = 31.9
Plate solving With GSC 1.1 (ok for wider fields)
Mount supports tracking rate offsets
Imager rotator support enabled
All-sky plate solving will be attempted when needed
All-sky service at nova.astrometry.net will be used
**Script Error (Tracking has been stopped)**
Source: Microsoft VBScript runtime error
Message: Permission denied
Location: line 705 column 9.