Hello ,

ACP crashed at meridian, the mount was in error state, any idea what the problem could be ?
it failed always on that field close to 00:00 RA

02:55:20 Within max error tolerance, no recenter needed
02:55:20 [flip check: Tn=15s HAc=11s GW=F HAz=15s DWz=T WF=YES]
02:55:20 (GEM must flip before next operation)
02:55:20 [FPw=0s FPe=0s HAt=0s PFM=120s
02:55:20 (waiting 121 sec to pass flip limit)
02:55:20 (wait ends at 02:57:21 UTC)
02:55:20 (turning tracking off)
02:57:25 (wait finished, resuming tracking)
02:57:25 (flipping mount...)
02:57:25 Start slew to target-87...
02:57:34 **Script Error (Tracking has been stopped)**
02:57:34 Source: ttTCLM_ASCOM.Telescope.1
02:57:34 Message: Telescope did not start to track - Setting 2 at POINTING.TRACK failed!
Command: FAILED
Event:
0 Hour angle -0h 00m 05.647s in range 12h-24h, selecting reverse tracking.
0 Target cannot be reached, HA axis in limit (target HA: 12h 00m 46.699s)
[ttTCLM_Java (TCLM/TPL2 ASCOM Driver, Java Backend)]
02:57:34 Location: line 2898 column 5.
02:57:34 Script Context:
02:57:34 2895: throw new Error(0x80040001, "**Target went out of limits during auto-flip"); // **OOPS** FAILED!
02:57:34 2896: Console.PrintLine(" (flipping mount...)");
02:57:34 2897: if(HardwarePierSide) beginSideOfPier = Telescope.SideOfPier; // See Gemini hack below
02:57:34 => 2898: SUP.StartSlewJ2000(Tgt.Name, Tgt.RA, Tgt.Dec); // MUST SLEW ALWAYS
02:57:34 ^
02:57:34 2899: if(SUP.HaveRotator)
02:57:34 2900: {
02:57:34 2901: Console.PrintLine(" (rolling rotator over 180 deg...)"); // This can be really slow so do it first
02:57:34 -- end --
02:57:35 **Script Error**
02:57:35 ACP script error 0x80073AFC from ThinScript.ActiveScript: