Hello,

Never got this with ACP6 so maybe one of the parmeters is not setup ok ? in Pintpoint I have 5 solve fails
but usually it just continues on same field even if astrometry does not work. This is often the case for the comets observed in narrow band filters where I have no stars or stars are elongated. And log says no star match. But here it is recenter failed.
An idea of what might have happend ? not much in the log.
thx
ej

03:36:17 Imaging to target-87-S001-R001-C096-I+z_dupe-1
03:36:17 (taking 15 sec. exposure, I+z filter, binning = 1)
03:36:18 (starting exposure)
03:36:38 (exposure complete)
03:36:40 (exposure complete and image downloaded)
03:36:41 Image finished
03:36:41 Plate-solve final image
03:36:42 1330 image stars found
03:36:42 134 catalog stars found
03:36:43 Solved! 34 stars matched.
03:36:43 Average residual is 0.14 arcsec.
03:36:43 Pointing error is 0.021 arcmin @ angle 71.54
03:36:43 True focal length is 4723.4 mm.
03:36:43 True binned plate scales (arcsec/pix): H = 0.59 V = 0.59
03:36:43 True image center (J2000): 00h 11m 31.2s 29° 08' 40.39"
03:36:43 Imager sky position angle is 177.2 deg.
03:36:43 Image FWHM is 1.6 arcsec (2.78 pixels)
03:36:43 (avg FWHM = 1.58 arcsec)
03:36:43 [flip check: Tn=0s HAc=3197s GW=T HAz=3200s DWz=T WF=no]
03:36:43 Re-slew to target.
03:36:43 Start slew to target-87...
03:36:46 **Recenter failed, ending this target
03:36:46 (turning tracking off for safety)
03:36:48 == Chaining to plan flatdawn.txt ==