Filter Order Settings for ACP Planner 4.2.6
Sorry to bother with such a trivial matter, but I've had a computer replaced (at NMS) with an updated ACP (latest version) and ACP Planner installed. I was previously able to set filter order for auto flats to be used by ACP and deployable using ACP Planner. I've found the AutoFlatConfig file at C:\Public\Public Documents\ACP Config and don't see script lines with which to set the auto flat filter order. Where the heck do I set this up?
I've been told that flats have to be manually written for each run, but I've succeeded in obtaining flats the past 4 y just clicking a box in ACP Planner for auto flats at dawn.
Thank you folks.:confused:
Filter Order Settings for ACP Planner 4.2.6
Also, the filter order in Planner should/must be in dusk order, and its generated flat plans will be in the correct order. The ordering in AutoFlatConfig hasn't been used in many years.
Are you running Planner on your observatory computer? You know you can run it locally and it will offer to upload your plan to the observatory? With TheSky and Planner you can set up your runs without RADMIN-ing into the Obs system...